Ansuz
Ansuz Powerbox D3
Ansuz Powerbox D3
Deliveries over $700 - Signature Required!
Couldn't load pickup availability
Share
Ansuz × House of Stereo / PowerBox D3
The power behind
active cables.
A dedicated low-voltage supply for the noise-control technology inside compatible Ansuz cables and Børresen loudspeakers.
See how it connects ↓
First, the simple explanation
Why would a cable
need a power supply?
Some Ansuz cables contain active noise-rejection circuitry. The cable carries your music between components; a separate small lead supplies the power that lets that circuitry operate. PowerBox D3 is the source for that second connection.
That distinction matters. You keep the normal audio connections in your system. The PowerBox connects to the cable’s dedicated power socket, rather than taking the place of the cable, amplifier or source.
Follow the two connections
Your music takes one path.
The PowerBox supplies another.
This example shows a compatible Ansuz interconnect between a source and an amplifier.
House of Stereo connection schematic, based on Ansuz’s PowerBox and TC Linkz documentation. Illustrative signal-cable setup; exact sockets and linking leads depend on your cable model. Compatible speaker-cable and loudspeaker applications use the appropriate DC Linkz connection.
A closer look at the back
Different sockets.
Specific jobs.

Mains input
The IEC C14 inlet supplies the PowerBox itself.
Active cables
Mini-jack connections for the dedicated linking leads of compatible signal and digital cables.
Phono cables
A separately labeled group for compatible Ansuz tonearm-cable applications.
DC connections
Barrel sockets for supported speaker-cable and loudspeaker applications, using the correct DC Linkz lead.
The mini-jacks are dedicated PowerBox connections, not headphone or analog audio inputs. Match the lead, output group and receiving product before connecting.
Inside the D3
Power delivery.
With noise control built in.
Ansuz combines several coil designs with analog dither circuitry and a composite enclosure. Its stated aim is to reduce electrical noise and mechanical resonance in the supply feeding the active technologies.

A coil and a counter-coil.
Ansuz describes its Tesla-coil principle as opposing windings intended to counter noise spikes. The D3 applies that principle in several forms.

Part of the board itself.
These coils use patterns on opposite sides of the circuit board. They form the largest coil group in the D3.

A complementary approach.
Ansuz uses carefully selected pulsating frequencies as another element of its noise-control system. The D3 has three dither circuits.
Technology illustrations: Audio Group Denmark. These illustrate Ansuz’s design principles, rather than a complete internal view of this unit. Noise-reduction and listening benefits described by Ansuz are manufacturer claims.

Beyond the circuit board
Built around
the whole assembly.
The D3 also incorporates active and passive cable coils, plus anti-aerial resonance coils. Ansuz uses these designs to address unwanted RF pickup.
Its natural-based composite cabinet is chosen to manage mechanical resonance. The material is part of the design, alongside the circuitry and dedicated connections.
Start with the cable you own
Recommended, required,
or already in the package?
An upgrade path.
Ansuz’s US price sheet lists PowerBox as recommended for D3 Signalz, Digitalz, Ethernet, USB and phono cables. Check the exact cable and its dedicated connection.
Plan for active power.
Applicable D-TC3, Supreme and Gold Signature signal and digital models are listed as requiring a PowerBox. Ask us to match the PowerBox model and linking leads to your particular cables.
Check the complete system.
The US sheet lists a PowerBox D3 with the D3 Speakz package. Some other Speakz packages include their matching PowerBox. Compatible Børresen models have their own connection requirements.
Before ordering a separate PowerBox, let us check what is already included with your cables. For existing systems, send us the model names and photos of their connection sockets.
Three Ansuz products, three roles
Which box does your system need?
PowerBox
Supplies low-voltage power to compatible active cable and loudspeaker technologies. This page covers the dedicated D3 PowerBox.
Mainz8
Distributes mains power to components through AC outlets. Choose this category when you need a mains distribution unit.
PowerSwitch
Distributes Ethernet network connections and incorporates PowerBox functionality for compatible cables. Existing owners should check available outputs before adding another unit.
The complete picture
PowerBox D3 specifications.
| Purpose | Low-voltage supply for compatible active Ansuz cables and Børresen loudspeakers |
|---|---|
| Mains input | IEC C14; manufacturer specification: 110/240 V |
| Output connections | Line/digital mini-jacks; phono mini-jacks; barrel DC jacks for supported speaker applications |
| Active square Tesla coils | 120 |
| Active / passive cable Tesla coils | 2 active / 2 passive |
| Analog dither circuitry | 3 circuits; third generation |
| Anti-aerial resonance Tesla coils | 3 |
| Enclosure | Natural-based composite material |
| Dimensions (H × W × D) | 97 × 272 × 397 mm Approximately 3.82 × 10.71 × 15.63 in |
| Weight | 3.85 kg / approximately 8.49 lb |
| Purchase unit | One PowerBox D3 |
Specifications: Audio Group Denmark. Imperial measurements are rounded conversions. System cables and optional upgrade leads pictured or discussed are not represented as included with this standalone PowerBox; contact us to confirm the supplied cable inventory for your order.
Useful answers before you order
Make the right connection.
Will PowerBox work with any audio cable?
It is intended for compatible products with dedicated PowerBox connections. An ordinary RCA, XLR, USB or Ethernet cable does not become an active Ansuz cable by adding this supply.
Does my music pass through the PowerBox?
In the interconnect example above, music travels through the Ansuz cable between your source and amplifier. The PowerBox uses a separate lead to energize the cable’s active circuitry.
Which linking cable should I use?
Ansuz TC Linkz serves compatible cable connections; DC Linkz serves supported speaker-cable and loudspeaker applications. Connector types vary. We can confirm the correct lead for your exact model.
Optional upgrade leads: TC Linkz D-TC Supreme · DC Linkz D-TC Supreme. Sold separately.
Can it power my DAC or streamer?
Do not assume a matching plug makes a component compatible. Ask us to verify the manufacturer’s voltage, polarity, current and connector requirements before using any DC output with other equipment.
What should I listen for?
Ansuz describes its goal in terms of reduced background noise and clearer spatial detail. A useful audition uses familiar recordings at matched listening levels. Talk with us about evaluating the PowerBox with your own compatible cables and system.
Continue your research
Go deeper.
Manufacturer documentation
Explore the current D3 specifications, the PowerBox family and the linking-cable system directly from Audio Group Denmark.
PowerBox D3 technology & specifications ↗
Compare the PowerBox family ↗
TC Linkz & DC Linkz explained ↗
Independent reading: the wider system
Christiaan Punter’s January 2024 HiFi-Advice article explains active cable connections and TC Linkz in an Ansuz network setup.
This reviews the PowerSwitch X-TC3 and D3, not the standalone PowerBox D3. It is included as background on the related cable-powering system.
Read the HiFi-Advice article ↗House of Stereo / System matching
Let’s map out
your connections.
Tell us which Ansuz cables and Børresen speakers you own—or are considering. We’ll help identify the right PowerBox, linking leads and any package inclusions before you order.
Get help with your system(904) 642-6677Product photography and technology illustrations: Audio Group Denmark. Connection schematic and buying guide: House of Stereo.
